Three - way machine is the production of three - way machine, three - way refers to the metal three - way, whether carbon steel, alloy steel, stainless steel, and titanium alloy of the company's production of three - way machine can be produced.  There are generally three kinds of three-way machine, hot drawing three-way machine, hot pressing three-way machine, cold extrusion three-way machine.  

Hot drawing tee machine is characterized by low cost, but the pull out outlet is not high enough, and a section of steel pipe needs to be welded.  

The hot press tee machine this process is first in order to produce a tee with a larger wall thickness than CSH80.  

Cold extrusion tee machine, is also the most commonly used tee production method, now the production scale is 1/2(21mm)-24(630mm), thickness is SCH80, it is characterized by high efficiency, low defect rate, reasonable price, generally a molding.  

The three-way machine is mainly composed of oil pump, motor, PLC control box, water tank and corresponding model molds.  

The body of the three-way machine is a non-standard product, so there is no detailed specification and model. We can customize the three-way machine according to the customer's request.  

The diameter of the tee is 21mm-630mm and the wall thickness is 3mm-20mm.  

The function of mechanical tee and ordinary tee is different.  Mechanical tee is divided into groove mechanical tee and screw mechanical tee.  It can be used to connect branch pipe directly on the steel pipe, and has more applications in the device of fire fighting pipe and spray pipe.  The mechanical tee can be used when diverting or confluence is required.  

The device method first uses a hole opener on the steel pipe, and then the mechanical tee is stuck into the hole, and the hole is sealed by a sealing ring along the pipe wall.  Mechanical three - wire connection and groove type two.  When the mechanical tee is connected, the clearance between the mechanical tee and the hole should be checked, and all parts should be average, and then fastened in place;  Mechanical tee hole spacing should not be less than 1m.