| Elbow beveling machine operation matters needing attention
The following is the company's introduction to the operation notes and operation instructions of the elbow beveling machine, hoping to help customers using the elbow beveling machine.
Before the operation of the elbow beveling machine, the operator should first train the beveling machine. Elbow groove machine by using the theory of rolling shear, driven plate rotating in hob Qin Jing relative movement, the Angle of the steel plate edge horn removed the requirement of the clients, elbow groove machine can also be to elbow, tee, reducer, pipe cap, pipe processing groove, carry on the processing according to customer's demand, is also point of view, on the above knowledge pipe diameter for the Angle of the groove Angle. Elbow beveling machine needs a smooth surface while beveling pipe fittings.
At the same time, compared with the separated groove method, the energy consumption is lower, the groove speed is up to three times faster, and there is no need to clean the burr. Such elbow beveling machine in the company order low price, small footprint, energy saving, simple operation, high efficiency advantages. In the pipe fittings, steel pipe and steel plate groove can be processed to the Angle required by customers.
In the use of the beveling machine, it is necessary to pay attention to: before starting the beveling machine, there should be no other objects nearby, so as not to affect the normal operation of the machine; The operator's hand and body should be far away from the beveling machine to avoid injuring the operator during the operation of the beveling machine, which may lead to the amputation of the human arm and body. Just like the blender, the knife head is very sharp and must be carefully operated. Before use, be sure to check whether the beveling machine is complete without damage, whether the size and model of the beveling machine are consistent with the pipe, and whether the fixed splint and the machine are consistent with the pipe; Before opening the machine, check whether the machine has burrs, sundries and things affecting the use of the machine. If there are things to be cleaned up in the smooth condition of no power supply to ensure the smooth operation of the machine; Before operating the machine, check whether the power cord is damaged. If there is damage, it must be repaired before it can be used. The power line is not long enough to operate, to get a long external power supply can continue to use; After the beveling machine is operated, the power should be cut off immediately and the plug can be unplugged before touching the machine. After cleaning the pipe, wipe the machine and put it back to its original position.
|
