| The introduction of cold push elbow machine
Mandrel type cold push machine, elbow machine itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize according to customer requirements
Elbow diameter from 21mm-630mm, wall thickness from 3mm-30mm we can do
The mandle-type cold push machine is mainly used for forming the stainless steel elbow. If the product you need is carbon steel or alloy steel elbow, it is recommended that you choose the medium frequency heating elbow machine
This series of equipment is mainly used for carbon steel, stainless steel 1D, 1.5D elbow cold push molding, the pushing method has steel ball through the ball pushing system and mandrel bar forming and pushing system two, mandrel bar forming and pushing system is equipped with semi-automatic mechanical demoulding device.
Mandrel type elbow machine is mainly used for stainless steel elbow forming, if the product you need is carbon steel or alloy steel elbow, it is recommended that you choose medium frequency heating elbow machine for the formation of the elbow.The main characteristics of mandrel type elbow machine are simple operation, low cost and high efficiency.Mandrel type elbow machine does not have specific specifications, we can be customized according to customers to directly.Elbow diameter 21-630mm, wall thickness 3-30mm we can do.
Installation method of cold push elbow machine
Cold push elbow machine is the main role of the production of stainless steel elbow, cold push elbow machine in the production of stainless steel elbow we should how to install the best effect, in the production process of the most convenient and use.In the installation of cold push elbow machine need to pay attention to these points, you can better use.
When installing, pull out the clamping die of the cold push elbow machine, so that you can fix the centering shaft, and then put the cold push elbow machine into the clamping die, and finally insert the fixed mandrel.
Adjust the elbow machine fixed to reduce some, in the control panel in manual mode, press the button, know the jia mo to the end.Then by adjusting the steamed bun and the wheel mold close, finally with the steamed bun seat fixed nut lock.
In the installation of cold push elbow machine through the above points, the installation of elbow machine in the production process of the best production effect.
18013-1901.
| 