Cold forming elbow machine operation method introduction
Before cold-pressing the elbow machine, it is necessary to check whether the power switch is normal and whether the hydraulic oil is enough. Check whether the die is damaged or not, and whether the height is in line with the demand. Check whether the die is in place and secure it. Adjust the view point positioning frame to the proper position, and put the electric heater in a regular pressure mode to start the elbow machine. First of all, admit that the elbow's view point is in place and then repeat the above actions. Marked operations for processed goods. Before starting the equipment, it is necessary to carefully check the presence of no goods or foreign objects in the mold. After the device is opened, it is forbidden to reach into the die or stroke of the ejector rod by hand. If abnormal conditions are present during the production process, it is necessary to cut off the power supply and acknowledge the shutdown before proceeding with the inspection. After the end of production, the power switch should be closed and the site should be closed. |
