Medium frequency pipe bending machine need to timely maintenance
Medium frequency pipe bending machine will encounter some problems in the long run process. It is easy to solve the simple faults and understand the mechanical maintenance personnel. If there are four problems, we need timely maintenance.
1, the wear degree of the main components of the transmission is limited, and there are also yaw, abnormal noise, vibration and jitter.
2, steering wear clearance is too large, operation failure, transmission gear and shaft wear is serious, difficult or regular jump gear shift, brake mechanism is seriously worn, brake performance degradation or failure, can not be adjusted.
3, the performance index of the engine dropped by more than 20%. The consumption of oil exceeds 1 times that of the engine temperature, and the fixed value of the engine reaches 45 degrees Celsius. When it is measured, it is less than the required index of 60%.
4, the deformation or cracking of the frame body, the serious wear of the working pipe bending machine, the failure of operation, the failure to complete the normal workload or the accuracy of the work can not meet the requirements, and the wear of the running gear is serious, so the pipe bending machine can not work normally. |
