| Elbow machine manufacturer for each customer service
First of all, introduce the installation and debugging of the elbow machine:
Pull out elbow push machine clamping die fixed mandrel.
Insert the clamping die of the elbow machine, and then insert the fixed mandrel.
Adjustment of elbow machine:
Fix and relax the clamping die seat of the elbow pushing machine, then put the control panel into manual mode and press the clamping tube button until the end of the clamping die path. (At this time, the gap between the wheel die clamping die, clamping die seat can be adjusted by adjusting the screw.
Adjust the clamping seat adjustment screw so that the clamping die is completely tight to the wheel die.
Press the back button to retract the clamping die, then rotate the clamping die adjusting screw clockwise about 1/2-1/4 turns.
Lock the clamping die seat retaining nut.
Maintenance of elbow machine installation process: elbow machine head and bed reinforcement design, annealing treatment to eliminate internal stress, the overall strength and stiffness is enough, will not be deformed. Drive spindle directly inserted into the head, accurate installation, easy maintenance, bending spindle and drive sprocket integral forging, integral processing, integral rolling teeth, keyless connection, uniform force, driven by the double cylinder, bending process, the rotor close to the bending set Angle before the hydraulic system automatic throttle buffer, greatly improve the bending accuracy, fast reset, return process close to the beginning of the throttle buffer, Greatly improve the reset accuracy and efficiency. Fully hydraulic drive, microcomputer controller can be preset 16 angles, can use elbow machine foot switch to complete the whole process, hydraulic clamping, hydraulic materials, hydraulic elbow, hydraulic core-pulling, five cylinders (can increase the car feeding and space Angle function).
Bend machine manufacturers to order pipe fittings around the world for every customer service.
|
