| Simple operation of pipe bender
The following is a brief introduction to the operation of pipe bending machine: First of all, before the operation of pipe bending machine, our company staff need to read the manual. Screw the working cylinder into the thread of the square stop block so that the rear end of the cylinder is mounted on the rack of the wheel downward. Select the measuring head according to the outside diameter of the pipe bender, put it on the plunger, put the corresponding groove of the two roller shafts towards the measuring head, and then put it into the corresponding size of the flower plate hole. On the cover of the upper flower plate, insert the bent pipe into the groove, pull back the quick joint of the high pressure oil pipe end and put it on the joint of the working cylinder, tighten the oil drain screw of the electric oil pump, and then bend the pipe. After bending the pipe, loosen the oil drain screw and the plunger will reset automatically.
Pipe bending machine can be roughly divided into CNC pipe bending machine, hydraulic pipe bending machine and so on. Mainly used for electric power construction, railway construction, boiler, bridge, ship, furniture, decoration and other aspects of pipeline laying and repair, with many functions, reasonable structure, simple operation and other advantages. In addition to the function of pipe bending, the machine can also use the cylinder as a hydraulic jack. Compared with CNC pipe bending equipment, it has the characteristics of cheap price and convenient use, and occupies a leading position in the domestic pipe bending machine market.
Pipe bender is a kind of industrial equipment. Pipe bending machine can be roughly divided into CNC pipe bending machine, hydraulic pipe bending machine, etc. Mainly used for electric power construction, railway construction, boiler, bridge, ship, furniture, decoration and other aspects of pipeline laying and repair, with many functions, reasonable structure, simple operation and other advantages. Application of pipe bending machine: it can bend all kinds of flat pipe and space pipe in accordance with the regulations. After replacing the mold, it can bend all kinds of round steel, Angle steel, channel steel, flat iron and other profiles.
The use method of hydraulic pipe bender: tighten the switch clockwise and loosen the bolts on the refueling port. The bending mould, the supporting wheel and the parts of the bending pipe are smooth and greasy. Turn over the upper formwork and select the corresponding bending die according to the size of the bent pipe. Install the bending die on the top of the acting stem. Insert two bearing wheels into the lower formwork and two corresponding holes and place the bent pipe. Then the small plunger pump is pressed to the desired Angle. After bending, loosen the switch anticlockwise, the action will automatically reset, turn over the upper template, pull out the pipe. The above briefly describes the use and operation of the pipe bender.
|
