| Five features of ordering pipe bender
The bending machine adopts touch screen and numerical control module, and the operation is dialogue-type, the program is easy to set up.
The bed structure of pipe bender is stable and not easy to deform. ,
The bending machine can set 16 bending angles for each gear and store 16 groups of files in memory.
The bending machine has the function of slow positioning, stable bending Angle, and the repetition accuracy reaches ±0.1°
The error information of pipe bender is displayed on the screen, which helps the operator to eliminate it immediately.
When the transformer is in operation (including no load), it is forbidden to stop the supply of cooling water. The waterway should be smooth to prevent water splashing on the transformer. The tortuous pipe should be carefully adjusted before torturing, so that the base of the collet and the base of the induction ring should be consistent, and the supporting wheel supporting the workpiece should be adjusted at the appropriate height, so that the workpiece can be smoothly fed into and ensure that the tortuous pipe and straight section are in the same plane. Before operating equipment should be according to the requirements of the medium frequency power supply and medium frequency transformer brake Ming ready to equipment and open, open, equipment cooling water when heated to the temperature of the winding pipe, and the temperature of the wall should be maintained at least above 910 ℃, but not higher than the technology for this kind of tube allows high heating temperature, the ability to open the main motor winding operation, Do not open the main motor before heating to tortuous temperature or workpiece without heating. After the winding is completed and heating is terminated, it is forbidden to open the main motor for the reverse operation of the turning wall before loosening the clamp. Welcome new and old customers to visit our Aocheng machinery factory, our company will introduce our intermediate frequency pipe bender in detail.
|
