| What is the main function of elbow machine?
Elbow head and bed reinforcement design, annealing to eliminate internal stress, the overall strength and stiffness is enough to prevent deformation. Drive shaft directly inserted into the upper head, accurate installation, easy maintenance, bend the spindle and sprocket and the overall forging, the whole processing, the rolling of the whole tooth, keyless connection, force uniform, driven by two cylinder, pipe bending process, the turning arm close to the hydraulic system of automatic throttle buffer before bending angles, greatly improve the bending precision, fast restoration, throttling cushion close to the beginning, Greatly improve reset accuracy and work efficiency. Fully hydraulic drive, microcomputer controller can be preset 16 angles, can use elbow machine foot switch once to complete the whole process, hydraulic clamping, hydraulic materials, hydraulic elbow, hydraulic core pulling, five cylinder (can increase the car feeding and space Angle function).
Elbow machine elbow pipe fitting classification introduction:
Carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon leaching, PVC, PPR, RFPP(increase polypropylene), etc.
According to the production method can be divided into push, press, forging, casting and so on.
According to the manufacturing standard, it can be divided into national standard, electric standard, ship standard, chemical standard, water standard, American standard, German standard, Japanese standard, Russian standard and so on.
According to its curvature radius, it can be divided into long radius elbow and short radius elbow. Long radius elbow refers to the pipe curvature radius equal to 1.5 times the outer diameter, i.e., R=1.5D. Short radius elbow means that the radius of curvature is equal to the outer diameter of the pipe, i.e., R=1.0D. (D elbow diameter, R radius of curvature).
Elbow machine installation process:
Installation: 1. Pull out elbow machine clamping die fixed mandrel. 2. Insert the clamping die of the elbow machine and then insert the fixed mandrel.
To adjust: 1. Fix and relax the clamping die holder of the pipe bender, then put the control panel into manual mode, and press the clamping button until the end of clamping die path. (At this time, the gap between the wheel die clamps is needed, and the clamping seat can be adjusted by adjusting the screw.
2. Adjust the clamping seat adjustment screw to make the clamping die and the wheel die completely close.
3. Press the "back" button to make the clamping die back, and then rotate the clamping die adjusting screw clockwise for about 1/2-1/4 turn.
4. Fasten the clamping bracket to the nut lock.
|
