| The elbow machine is manufactured according to the needs of the project
Hebei Aogang pipe fittings equipment manufacturing manufacturers mainly according to the needs of customers in the project manufacturing process forming, so that the production of elbow machine in the use of simple operation, high production efficiency, long service life and other advantages. Elbow machine equipment is mainly divided into automatic and semi-automatic and manual, those who order the production of our company elbow machine, our company will provide customers with simple operation ha technical parameters, so that customers in the company at a low price to order satisfactory recognized elbow machine equipment.
Bend machine directly from the nose upper insert when transmission shaft assembly, accurate installation, maintenance, then, the bend axis and sprocket and integral casting, the whole processing, overall hob, keyless connection, average stress, driven by double oil cylinder, pipe bending process, the turning arm before bending close to set the Angle of the hydraulic system of automatic throttling buffer, great progress in the bending precision, fast restoration, Throttling buffer is set close to the starting point in the return process, which greatly improves the reset accuracy and working efficiency. Full hydraulic drive. The MICROCOMPUTER controller can preset 16 kinds of angles, and the whole process flow can be completed at one time by using the foot switch of the elbow machine.
Elbow mechanism for elbow pipe fitting classification:
The material is divided into carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon chromium leaching, PVC, PPR, RFPP(increase polypropylene) and so on.
The production method can be divided into pushing, pressing, forging, casting and so on.
According to manufacturing standards, it can be divided into national standard, electric standard, ship standard, chemical standard, water standard, American standard, German standard, Japanese standard, Russian standard and so on.
According to its curvature radius to divide: can be divided into long radius elbow and short radius elbow. A long radius elbow is one whose radius of curvature equals 1.5 times the outer diameter of the pipe, i.e., R=1.5D. A short radius elbow has a radius of curvature equal to the outer diameter of the pipe, i.e., R=1.0D. (D is elbow diameter, R is curvature radius).
According to the pressure level, there are about 17 kinds of pipe standards, which are the same as those of the United States, such as Sch5s, Sch10s, Sch10, Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS; Sch80, SCH100, Sch120, Sch140, Sch160, XXS; The two commonly used are STD and XS.
According to different shapes, it can be divided into: groove elbow, clamp sleeve elbow, double bearing elbow, flange elbow, reduced diameter elbow, inside and outside elbow, punching elbow, push elbow, socket elbow, butt welding elbow, inner wire elbow, etc.
|
