| Technical requirements for making elbow machine
Elbow machine in the production of technical requirements are according to the requirements of the customer production processing forming, in the production process, first of all, our company's engineers to make a drawing to provide customers, obtain customer satisfaction and recognition after our company processing production molding to provide customers. The processing principle of elbow machine: to have a certain geometric shape and size of the core head, namely the horn core head for the mold, the rear welding with a proper length of the core rod. The length of the core rod is determined by the length, size and quantity of the tube billet pushed back and forth in each operation. Push forward, the tube blank to be pushed from the end of the core rod into the core rod, and then sent to the push plate. When pushing, the pushing plate slowly pushes the tube billet forward, and when the front end of the tube billet begins to enter the direction of the heating ring, it will be heated immediately. At this time, the pushed tube blank begins to undergo thermoplastic deformation, that is, the bending deformation occurs at the same time as the diameter expansion deformation. This deformation process continues until the elbow is completely detached from the core head and the elbow has been pushed into shape.
The elbow machine can push the elbow fittings from different angles, and the elbow machine can produce all kinds of elbows of the same material according to the needs of customers. Elbow machine in the production process of simple operation, advanced production efficiency. Elbow machine is divided into active and manual operation methods. The elbow machine manufacturer can manufacture according to the customer's demand.
Elbow unit: main engine, hydraulic pump station, operation table, motor control cabinet, IF power supply, compensation capacitor, water cable, IF coil adjusting frame, reactor.
Elbow manufacturing process: The shaped elbow is sent to the correction mold on the workbench of the hydraulic press with a forklift truck to complete one elbow correction, and the reduced diameter corrected elbow is taken out from the correction mold with a forklift truck. Then rough machining, machine processing or gas cutting off the excess at both ends of the elbow, 10 ~15mm groove processing allowance is reserved. This elbow machine for elbow composition, the main power is hydraulic cylinder, heating method is intermediate frequency heating (in addition to coal furnace and gas heating). The elbow machine has the advantages of high geometric accuracy, uniform wall thickness, stable structure size, good mechanical performance and high productivity.
The company mainly produces a variety of different types of elbow machine, tee machine, pipe expanding machine, bevel machine, press, pipe bending machine, straightening machine, straight seam welding pipe production line, mold and so on. Welcome customers to the company to visit and order!
|
