| How to maintain elbow machine normally
The company briefly introduces the maintenance of elbow machine: first of all, check the fasteners of each part, so that they are in the state of fastening. Each joint of hydraulic pump station of elbow machine is equipped with oil-resistant rubber seal ring. If the seal ring is damaged, oil leakage should be replaced in time. If the front and back faults are found, first check whether the solenoid valve is normal, and then check whether the sequence valve, overflow valve or one-way unloading valve is stuck with impurities. The above phenomena generally occur at the beginning of the work. If stuck, remove with gasoline or oil cleaning, reinstall. Clean the tank and filter the hydraulic oil within 1-2 months after the elbow machine equipment starts to use.
When the elbow machine cleans the oil tank, the inlet filter of each pump should be cleaned. Elbow machine is mainly used for the elbow on the air conditioning Hvac duct. Drive spindle of elbow machine is directly inserted into the upper part of the head, accurate installation and easy maintenance. Elbow spindle and drive sprocket integral forging, integral processing, integral hobbing, keyless connection, uniform force, driven by two cylinders. During operation, the hydraulic system automatically throttles the buffer before approaching the set bending Angle, greatly improving the bending accuracy. Full hydraulic drive. PLC control system can promote a variety of customer customized Angle, the whole manufacturing process can be completed by the foot switch of elbow machine in one time.
All in the company to order elbow machine customers our company will be in the factory when the customer to make a elbow machine maintenance certificate and elbow machine is how to operate the process. This elbow machine in the transport to the hands of customers, customers can be normal use and production.
|
