| How to clean the cylinder of elbow machine
Cleaning of elbow oil cylinder after customer orders elbow machine:
The cleaning process of the hydraulic cylinder worn by the elbow machine: First of all, we should know the hydraulic cylinder to be removed, measure before disassembly, and pay attention to the position and size of the oil port. The next step is to remove the cylinder bottom, cylinder head and guide sleeve. Remove the piston rod from the cylinder tube. To prevent injury to the piston rod, remove the piston. The piston is usually close to the thread, but will have a stop thread. To remove the sealing ring, remove the stop and return screws first. When there are more than one hydraulic cylinder in the hydraulic system, it is necessary to connect which valve at the pump outlet. Install the solenoid valve. This valve controls the pressure of your entire system. When the cylinder does not rise, the pressure can be released from the nominal pressure. Under nominal pressure, the hydraulic cylinder can be used normally when the valve is closed, and the electric control overflow is stable and convenient.
The company's production of elbow machine can produce and process the diameter of 21-1620mm wall thickness of 3-120mm elbow pipe fittings, the main production of material is divided into; Carbon steel, alloy steel, stainless steel, etc. The radius of elbow pipe fittings is divided into long radius elbow and short radius elbow, and elbow pipe fittings are divided into seamless elbow and straight seam elbow. The elbow machine is processed in this way in the production process.
By using the elbow machine commonly used for elbow bending, the heating coil is used for heating, and the blank on the die is moved forward under the push of the elbow machine, heating in motion, thus enlarging the diameter and the Angle required for bending. This is the current elbow machine production elbow pipe fitting simple production process. This production process can help customers bring effective benefits.
|
