| Medium frequency pipe bender manufacturers provide simple operation mode
Intermediate frequency pipe bender is a new type of pipe bending function and top function of bending things. With reasonable structure, smooth operation, convenient operation, reasonable price, a machine and many other advantages, occupy a large market share. Before the machine operation of the bending equipment, no load operation is allowed. After the normal operation is admitted, the pipe bending shall be set with mold. The pipe mold shall be selected according to the diameter of the processing pipe, and it shall be put in order. During operation, non-operating and assisting personnel shall not stay near the machine to watch. After the operation, the power supply should be cut off, the electric box should be locked, and the daily maintenance work should be done.
The initial processing clamp spacing of intermediate frequency pipe bender is slightly greater than the sum of the clamp spacing after top forging, the top banking process of pipe bender and the burning allowance. Generally speaking, the thickness of the steel belt processed by the bending machine is larger, and the initial gap between the jaws is also larger; The width of the strip is larger, and the initial gap between the jaws is larger. Elbow machine processing after the top forging clamp spacing according to the thickness of the strip to select. If the processing interval of pipe bender is too large, it will simply form lap welding and change, and if the interval is too small, it will form a large temperature difference along the welding section. The thinner the strip is processed by the pipe bender, the smaller the clamp spacing should be after top forging. For steel strips with thickness of 2-4.5 millimeters, elbow machine processing usually selects the top forging after the clamp spacing of 12-18 mm.
Intermediate frequency pipe bender, its working principle is to use the intermediate frequency power supply to heat the steel pipe, and promote the steel pipe at a uniform speed, so that the heated part of the steel pipe along the preset track to form a certain radius of curvature and Angle of the bend.
Steel tube in place first, via the radial rotary device of screw gearing adjust bend radius, the intermediate frequency induction heating coil to bending of steel pipe after heated to a certain temperature, powered by hydraulic bending, by car pole pushed forward, the platform has four waist wheel clamping steel pipe, the adjust good bending radius deformation and bending in heating place, After the steel pipe is deformed, it is cooled by spraying water to obtain the required bending pipe fittings.
In order to prevent the ellipse of steel tube after heating, the steel tube is predeformed before heating. Those who order intermediate frequency pipe bender equipment in our company our company to provide you with quality assurance equipment at a low price.
|
