| Intermediate frequency pipe bender and hydraulic pipe bender operation flow
The simple operation mode of the pipe bender is mainly based on the proficiency of the operator, and whether the pipe bender is automatic or manual operation. The above two are related to the simple operation of the pipe bender. The following is a brief introduction to the operation mode of the pipe bending machine: The automatic pipe bending machine should be placed in a wide operation space according to the position, which is enough to stretch the operation field of the pipe bending machine. The surrounding environment of the pipe bending machine should be kept clean and orderly, and the smooth placement of tools does not hinder the pipe bending operation of the pipe bending machine.
Pipe bender in the process of production need to check around the work, remove all obstacles to work and traffic debris. No grease on the ground to avoid slipping. The workpiece should be stacked firmly, so as not to collapse to people.
During the work of pipe bending machine, no one shall be allowed near the travel range of pipe bending, and protective signs shall be set up. The staff shall carry out the production of the next pipe after the pipe bending machine is completed. So as not to get on the operator.
The bending machine should pay attention to the safety around the straightening pipe, and wear gloves according to the number of minutes needed. Two operators working at the same time to closely cooperate, coordinated, should be formulated operator control switch.
The operator should be familiar with the structure, performance and routine protection and programming of the pipe bender.
The above is the company to introduce the simple operation of pipe bending machine.
| 