| The function and wide application of beveling machine
With the rapid development of industry and the continuous increase of automobile output, people consume a large amount of oil, and the cost of transporting oil has a huge impact. So laying pipelines is a low-cost way to transport oil. After laying oil pipelines, repair is indispensable, and repair or repair work requires welding. There are clear technical specifications in the world. When welding pipelines, if the thickness of the pipe wall is more than 3mm, the pipe fittings must be beveled. However, many enterprises in the world produce pipe fittings without bevel processing, which brings many problems in the later construction stage. Flame cutting is the most commonly used method before beveling machine. Although it will be relatively simple in operation, the Angle of processing is not rigorous, and even the slope is uneven and the operation sound is too large. The research and development of groove processing machinery groove machine, has the advantage of mass production, but also has more convenient operation, groove Angle and surface and quality are guaranteed, eliminate the defects of flame cutting, currently groove machine has been fully used in pipeline welding and follow-up repair work. In addition, beveling machine is also widely used in submarine oil and gas pipelines and urban underground pipelines.
Main part of the groove machine has five, respectively is left, middle and right processing unit, and about the processing unit on the linear guide, to keep the unit level, and the processing unit is placed on the linear guide, but is are fixed vertically, and specially configured to heavy facilities, to offset their own weight also can avoid the accident, At the same time, in the selection of servo motor, a separate set of braking equipment should be configured for the servo motor. The composition of left, middle and right processing units of beveling machine is roughly the same.
Beveling machine features: no vibration, no heat, no smoke, no dust. We use standard carbide blades for free cleaning of free side burrs. Adjustable cutting height variable Angle 15-50°. Easy to operate, self-supporting workpiece, including pipe groove accessories, power 1500W, only 94KG. Our beveling machine mainly provides slow grinding and has more production function than gas cutting beveling. The world's fastest is 3.5 meters per minute.
|
