| Bend machine manufacturer's structural design of equipment
The spindle device of the bending machine is directly inserted into the upper part of the machine head, which is accurate in installation and convenient in maintenance. Elbow machine according to the needs of customers to choose a double cylinder drive. The hydraulic system takes the initiative to save buffering before approaching the setting Angle of bending, greatly improving the bending accuracy and fast reset. When returning, setting near the starting point saves buffering, greatly improving reset accuracy and work efficiency.
The head of the elbow and the bed part of the reinforcement plan, annealing to eliminate internal stress. This group has sufficient strength and stiffness to prevent deformation. The driving spindle device is directly inserted into the upper part of the machine head, accurate installation and convenient maintenance. Elbow machine adopts hydraulic drive, PLC control system can preset 16 angles, elbow machine pedal opening and closing can complete the whole process at one time.
Elbow machine is mainly used for cold push forming of stainless steel elbow, equipped with semi-automatic mechanical demoulding device. Suitable for cold push production elbow pipe fittings. Elbow material: stainless steel, alloy steel. The equipment realizes PLC programming control in the process of cold push elbow, in order to realize the point and semi-automatic operation. The working pressure, push speed and travel range of the equipment can be controlled according to customer requirements.
The main use of elbow machine is elbow machine is the main production of elbow equipment, can produce 21-1620 mm diameter, wall thickness of 3-100 mm, elbow multiple more than 1D carbon steel, alloy steel and other materials.
After using the elbow machine, first check the clutch, spring and belt of the elbow machine. Inspect smooth equipment of machine tool. Check whether the circuit is damaged or aging, motor and electromagnet are normal. Check crankshaft guide rail for accuracy and wear. Check brakes, clutches, sliders, closing blocks and closing rings. Look at some electrical controls. Check and adjust table connection bolts for elbow machine. According to different types of elbow machine and processing requirements, make targeted and feasible smooth operation, and carry out necessary post training and operation.
The maintenance, adjustment and equipment of the elbow machine, adjustment and disassembly of the mold should be carried out when the machine tool is disconnected from the power (such as electricity, gas, liquid) and the machine tool stops working, and the pad block is placed under the slide block for firm support. The starting switch of machine tool is marked with warning. Users and operators must comply with the instructions and operating rules provided by the designer, and use and maintain correctly. The above is the company to introduce the customer elbow machine structure design and operation process. If you do not understand the elbow machine pipe fitting equipment, our sales staff and engineers welcome your call and factory consultation!
|
