| Notes and control system of hydraulic pipe bender
The matters needing attention in the operation process of the hydraulic pipe bender are: the hydraulic pipe bender must be installed smoothly and firmly before use, and the required open space device on the railing in production. Before bending, the hydraulic pipe bender should first run in no-load, and after confirming normal operation, the pipe is covered with mold. No load test is allowed. Bending steel pipes beyond the diameter and wall thickness specified by pipe bender is strictly prohibited. Tube mould must be selected according to machining pipe diameter and placed in sequence. Oil or lubricant shall not be placed between the pipe and the pipe mold during the hydraulic pipe bender. Clamping parts, guide plate supporting structure should be replaced in time in the direction of the bend. The electrical part should be grounded or zeroed as required. Operators need to take good care of machinery, rotating parts regularly refueling, regular maintenance. The above is our company's summary of the hydraulic pipe bender in the process of operation need to pay attention to matters.
Hydraulic pipe bender
Hydraulic pipe bender is designed and manufactured for large diameter pipe engineering and for the ever-increasing market demand of various specifications of pipe bender.
The bending radius and Angle of the bend can be adjusted according to the user's requirement.
The equipment is made of seamless steel pipe, welded steel pipe or coiled steel pipe.
The specification of hydraulic pipe bender: we can do the bending diameter from 21mm to 1620mm, the wall thickness from 3mm to 100mm
The bending radius of the elbow shall be greater than or equal to 3D, and the elbow Angle shall be adjusted arbitrarily within a certain range.
The stroke of the main cylinder is determined according to the caliber and bending radius of the steel pipe bend (provided by the customer).
Hydraulic pipe bender can be used for carbon steel, alloy steel, stainless steel pipe of any material
The hydraulic pipe bender mainly consists of: frame, main cylinder support plate (including main cylinder), movable push plate, elbow clamp platform, elbow rocker arm, rocker arm rail, rocker arm shaft, elbow combination clamp, intermediate frequency transformer support, intermediate frequency power supply, intermediate frequency transformer, electrical control system and so on.
| 