| How to use elbow push machine
According to the first bend specification, billet, the tube billet collected set of the commonly used in the specification elbow push system is oriented on the mandrel, and then use mandrel of induction coil to heat pipe die head, when heated to a specified temperature, the role and mandrel axial thrust, under the guidance of tube billet gradually produce radial expansion and axial bending deformation,The smaller diameter tube billet is formed and pushed into the larger diameter elbow.
What is the elbow push machine composed of?
The elbow push machine includes:Strip base (1), cylinder (2), cylinder bracket (3), rear baffle (4), push plate (5), front baffle (6), etc., in the front baffle (6) and the rear baffle (4) between the center of the hole connected with a guide pipe (7), in the front baffle (6) inside, is provided with a roller box (8),The outer side of the front baffle plate (6) is vertically fixedly connected with a rocker arm base (9), the rocker arm base (9) is provided with a movable axis (10), the movable axis (10) is connected with a rocker arm (11) with an adjustable length, and the front end of the rocker arm (11) is connected with a chuck (12) relative to the center hole.
Elbow push-making machine is a pipe fitting processing equipment which can not only bend the pipe fittings but also push and make the elbow. It is easy to operate and reduces the cost
|
