| The configuration device of three-way machine
The three-way machine equipment will not be deformed during operation.The welding parts of the three-way machine shall be inspected by non-destructive inspection.There are T-shaped grooves above and below the table of the three-way machine, which are used to install the mould.The three-way machine is equipped with dead-point lock device on the slide block to prevent the slide block from sliding down.The power structure of the three-way machine is placed on the top of the machine, and the top of the fuselage is provided with a stable platform and a fence.The slider guide rail of the three-way machine is lubricated with non-recovery type automatic thin oil back and forth, and there is no oil receiving box and fault display device.The fuselage of the three-way plane is dark gray.We can also customize various colors according to customer's requirements.
Tee machine equipment is commonly used in Tee production equipment.Structure of the three-way machine: the optimization design of the whole frame fuselage of the three-way machine ensures the strength; the welding parts are inspected for non-destructive flaw detection; the aging treatment is made after welding to ensure the stress elimination and no deformation occurs in the use of the equipment.There are T-shaped grooves under the slide plate and above the worktable for the installation of molds.The three-way machine is equipped with the dead-point locking device on the slide block to prevent the slide block from sliding.The power structure of the three-way machine is placed on the top of the machine, and the top of the fuselage is provided with a stable platform and a fence.The slider guide rail of the three-way machine adopts non-recovery type automatic back and forth thin oil lubrication, and is equipped with oil receiving box and fault display device.
The 2021-5-19
| 