| The structure and color of the three-way machine
The three-way machine equipment will not be deformed during operation.The welding parts of the three-way machine shall be inspected by non-destructive inspection.There are T-shaped grooves above and below the table of the three-way machine, which are used to install the mould.The three-way machine is equipped with dead-point lock device on the slide block to prevent the slide block from slipping.The power mechanism of the three-way machine is arranged on the top of the machine, and the safety platform and fence are arranged on the top of the fuselage.The slider guide rail of the three-way machine is lubricated by non-recovery type automatic circulating thin oil, without oil box and fault display device.The fuselage of the three-way plane is dark gray.We can also customize various colors according to customer's requirements.
Three - way machine equipment for three - way production special equipment.The structure of the three-way machine: the optimization design of the whole frame fuselage of the three-way machine ensures the strength, the welding parts are inspected for non-destructive flaw detection, and the aging treatment is made after welding to ensure the complete elimination of stress and no deformation occurs in the use of the equipment.There are T-shaped grooves under the slide plate and above the worktable for the installation of molds.The three-way machine is equipped with the dead-point locking device on the slide block to prevent the slide block from slipping.The power mechanism of the three-way machine is arranged on the top of the machine, and the safety platform and fence are arranged on the top of the fuselage.The slider guide rail of the three-way machine is lubricated by non-recovery type automatic circulating thin oil, and equipped with oil receiving box and fault display device.
3212-3302.
|
