| Simple classification of three-way machines
Tee machine is a machine for making tee. The material of tee is carbon steel, alloy steel, stainless steel and titanium alloy. There is no problem.Tee machine in the production of three common three, hot drawing three-way machine, hot press three-way machine, cold extrusion three-way machine.The characteristics and characteristics of hot drawing tee machine are that the cost is low, but the pull out outlet is not high enough, and another section of steel pipe needs to be welded.The main process of hot pressing tee machine is to make tee with larger wall thickness than SCH80 tee.Cold extrusion tee machine is the most commonly used tee manufacturing machine, the current manufacturing tee range is 21mm-630mm, thickness is 3mm-20mm, cold extrusion tee machine production efficiency is high, low defect rate, cold extrusion tee machine in the production of a tee molding.
The structure and color of the three-way machine
The three-way machine equipment will not be deformed during operation.The welding parts of the three-way machine shall be inspected by non-destructive inspection.There are T-shaped grooves above and below the table of the three-way machine, which are used to install the mould.The three-way machine is equipped with dead-point lock device on the slide block to prevent the slide block from slipping.The power mechanism of the three-way machine is arranged on the top of the machine, and the safety platform and fence are arranged on the top of the fuselage.The slider guide rail of the three-way machine is lubricated by non-recovery type automatic circulating thin oil, without oil box and fault display device.The fuselage of the three-way plane is dark gray.We can also customize various colors according to customer's requirements.
3201-3212.
|
