| Three - way machine production three - way process
Before the production of tee, we must choose what type of tee we want to produce, and we choose the corresponding mold.When this tee machine in the production of three links, will first cut good tube rounds into the mould cavity, under the action of the hydraulic cylinder to press the plunger have a haircut into on both ends of pipe fittings, pipe cavity seal, and then after a fluid channel in the have a haircut will inject pipe cavity liquid medium, at this time on mould moves down, together with the lower die constitute a closed cavity, the high-pressure pump and valve control liquid pressure increasing,The push head pushes the pipe fitting inward, and the pipe wall deforms and gradually adheres to the inner wall of the mold. In this process, the tee is extruded and formed.
Part of the three-way machine composition
Tee machine is mainly composed of oil pump, motor, PLC controller, water tank and mould for the production of three.Three - way machine body belongs to non - standard products.Therefore, there are no detailed specifications and models. We can customize the three-way machine according to the needs of customers.The diameter of the tee is 21mm-630mm, and the wall thickness is 3mm-20mm. In the production of the tee, the pipe billet is used as the raw material, and the material of the raw material is generally carbon steel, stainless steel, etc.Tee is the use of plastic deformation in the mold cavity, the wall of the tube and the inner surface of the mold, and then get the required shape parts of the molding skills.
29013-29014.
|
