| How to know the stroke of elbow push machine correctly
The stroke of elbow push machine is generally not only the length of the cylinder, the length of the cylinder is greater than the stroke of elbow push machine.
The elbow push machine is divided into small push machine and large push machine. The products produced by the elbow push machine are widely used in many fields such as petroleum, chemical industry, construction, water conservancy, etc., especially in a large number of use in transportation engineering.
The composition of the elbow push machine includes: the frame, the main cylinder support plate (including the main cylinder), the movable push plate, the front support plate, the semi-automatic feeding mechanism, the intermediate frequency coil adjustment frame (including the intermediate frequency heating coil), the intermediate frequency power supply and the electrical control system.
Elbow push-making machine is a tradition of Aocheng mechanical equipment, mainly producing various 1D-2.5D elbows.
Elbow push machine design and can push the model
Elbow pushing machine is a device for pushing elbow.It is mainly designed to solve the problem of large wall thickness difference of pressing elbow.It includes frame, intermediate frequency heater, hydraulic system, with fixed bed fixed to the frame of the back-end, fixed with a hole at the center of the machine, the oil cylinder is fixed on the fixed table, no bar and rod of oil cylinder cavity respectively through the pipe connected to the hydraulic system, have a haircut and the oil cylinder cylinder rod fixed contact, have a haircut central hole, intermediate frequency heater with heating coil wire connection,Wedge key hole is at the back of the core rod from the middle of the heating circle and have a haircut in the hole and the center of the fixed bed hole through the wedge key to wear in the key hole wedge core rod, activity semicircle card board is composed of upper and lower two semicircle card board, card board activity half of upper and lower two semicircle card board are installed on the surface before have a haircut at the same time set on the mandrel and with core rod gaps.The advantage is that the produced elbow wall thickness is uniform.
Elbow pushing machine itself belongs to non-standard products, so there is no specific specifications and models. We can directly customize according to customer requirements. Elbow pushing machine can push elbow diameter from 21mm-1620mm, wall thickness from 3mm-120mm and above these models.
2701-2703.
|
