| Repair and maintenance of pipe bender equipment
First of all, check the fasteners of all parts of the pipe bender and make them in a tight state.
Each joint of the hydraulic pump station is equipped with oil-resistant rubber sealing ring. If the sealing ring of the pipe bender is damaged or leaking oil, it should be replaced in time.
If the forward and backward failure is found, first check whether the solenoid valve acts, such as the solenoid valve acts normally, check whether the sequence valve 6XS, the relief valve YF-L20H4 or the one-way unloading valve 4HD3 has impurity stuck phenomenon.In the encounter this phenomenon is generally in the beginning of the use of pipe bender, easy to occur.If it is stuck, it is necessary to disassemble it with gasoline or diesel oil and then clean it again.Clean the cylinder and filter the hydraulic oil once within 1 to 2 months after the pipe bender is started.When cleaning the tank, the oil inlet filter of each pump should be cleaned.The above is a brief introduction of the repair and maintenance of pipe bender equipment for customers.
What are the main categories of pipe bender
Pipe bender is generally divided into three categories: pipe bender, hydraulic pipe bender, CNC pipe bender.
The pipe bender is mainly electric, with a motor drive, a transmission, and a traditional wheel chain.
Hydraulic pipe bender is to decompose the bending action, respectively, using hydraulic pressure to drive the clamping back clamping, bending back, auxiliary machine auxiliary back, into the core back core and other actions.Hydraulic pipe bender is an ordinary plane winding type automatic pipe bender, pipe bender production of pipe bending action is automatic, but its feeding, three-dimensional Angle and so on can only rely on fixed length and Angle positioning gauge by manual to complete.
CNC pipe bender is the servo motor to replace hydraulic respectively to control the car feeding back and tilt Angle of rotation, bend bend back, auxiliary machinery and auxiliary, head movements, etc., but its clamping clip, back into the core core or use hydraulic or pneumatic drive, its and the difference is that the production of hydraulic pipe bender continuous curved pipe, machining precision and pipe fittings of three-dimensional shape.The above is the main classification of pipe bender has three kinds, above briefly introduced the pipe bender, hydraulic pipe bender and CNC pipe bender.
2404-2407.
|
