| The formation and process of three-way machine
The three-way machine is used for the formation of the three-way, the main power is the hydraulic cylinder.The three-way machine itself is a non-standard product, so there is no specific specification and model, we can directly customize according to customer requirements.We can do both the diameter of the tee from 21mm to 630mm and the wall thickness from 3mm to 20mm.
Tee machine leading process using tap water to squeeze straight pipe into three, reduce lead filling, repairing lead blank, drilling, lead back and other processes, save costs and production time, in order to ensure the stability of water pressure, we use pressure balance to stabilize the water pressure in the copper pipe squeeze three, so that the copper pipe in the extrusion process to maintain a constant pressure;Both sides of the cylinder to adjust the synchronization performance, we also use the synchronizer to synchronize the two sides of the cylinder, so as to achieve a higher rate of finished products (can process the diameter of more than 7 mm copper pipe, pass rate of more than 98%, molding cycle of about 10 seconds/time).
Tee machine is suitable for the special hydraulic press made of carbon steel and stainless steel pipe, suitable for the extrusion molding of various specifications of the joint of three way pipe fittings to change the position of the side cylinder, can process and manufacture 90 degrees, 135 degrees and other angles of the joint of three way pipe.
Three - way machine manufacturer is the most professional hydraulic three - way machine equipment manufacturers, specializing in the production and manufacture of various mechanical equipment.
Technical update of three-way machine
The company after years of production of the three - way machine gradually develop and grow.Modern cutting skills or numerical control skills, as long as the use of this skill to ensure the full automation of cutting skills, precision.The use of this product is must pay attention to careful maintenance, operation, at any time to listen to the sound of the use of this product is not normal, use to adhere to an outstanding environment, if you meet any problems by professionals to repair.
The three-way machine is used for the formation of the three-way, the main power is the hydraulic cylinder.The three-way machine itself is a non-standard product, so there is no specific specification and model, we can directly customize according to customer requirements.We can do both the diameter of the tee from 21mm to 630mm and the wall thickness from 3mm to 20mm.
The above is the company to three - way machine technology update a brief introduction.Welcome new and old customers.
Classification and molding of tee - way machines
Three - way machine is the production of three - way machine, three - way refers to the metal three - way, whether carbon steel, alloy steel, stainless steel, and titanium alloy of the company's production of three - way machine can be produced.There are generally three kinds of three-way machine, hot drawing three-way machine, hot pressing three-way machine, cold extrusion three-way machine.
Hot drawing tee machine is characterized by low cost, but the pull out outlet is not high enough, and a section of steel pipe needs to be welded.
The hot press tee machine this process is first in order to produce a tee with a larger wall thickness than CSH80.
Cold extrusion tee machine, is also the most commonly used tee production method, now the production scale is 1/2(21mm)-24(630mm), thickness is SCH80, it is characterized by high efficiency, low defect rate, reasonable price, generally a molding.
The cold drawing three-way machine is equipped with an independent electrical control cabinet, and the main operation button station is suspended on the fuselage.
The body of cold drawing tee adopts PLC controller.The power supply of the cold drawing three-way machine is made by our company according to the customer's supply.
The company's cold-drawn three-way machines are exported to many countries such as Malaysia, Turkmenistan, India, Russia and other countries.
In addition to the production of cold drawing tee machine, there are pipe bender, elbow machine, tee machine, pipe expanding machine, beveling machine, press and other above all pipe fittings equipment mold.
The 2209-2214-2215
| 