• - Cold Forming Elbow Machine
• - Hot Forming Elbow Machine

• - Pipe End Expanding Machine
• - Full Length Pipe Expander

• - Single-Head Pipe Fittings Beveling Machine
• - Automatic Double-Head Elbow Beveling Machine
• - Automatic Triple-Head Tee Beveling Machine
• - Large Steel Pipes Beveling Machine

1, cooling circulating water system (pool, water pump, water distributor, upper and lower water pipeline).

2. Hydraulic oil for elbow machine: 1: HM anti-wear hydraulic oil 32#-100# (46# is recommended).

3. Connecting wires and cables shall be set in the production workshop. See the operation manual provided by the production equipment for specifications.

4. Medium frequency induction coil and elbow die core can be purchased separately according to production needs.

5. Auxiliary equipment: hydraulic pressure groove machine, pipe end notch machine, elbow testing equipment, etc.

6. The above simply introduces the need for the customer to prepare for the customized elbow machine.If you do not understand you are welcome to the factory consultation or call.

The elbow machine is composed of the following components: the main machine of the elbow machine, the hydraulic pump station, the operation table, the motor control cabinet, the intermediate frequency power supply, the compensation capacitor, the water cable, the intermediate frequency coil adjusting frame, the reactor.

The diameter of the elbow machine is 21-1620mm and the wall thickness is 3-120mm.Push the material is generally carbon steel, alloy steel, etc.If it is stainless steel elbow, choose our company's cold push elbow machine.

Structural design of elbow machine equipment

Structural design of elbow machine equipment: elbow equipment requires automatic feeding function, pipe material conveying device is determined according to customer requirements, and customers need to push the size of the elbow.The feeding mechanism of the elbow equipment feeds the material, one at a time. After the elbow equipment completes a push, it can be pushed next time without waiting.In addition, in order to make the elbow from the core die after falling in the same direction, not disorderly, the blanking end adopts the elbow mold under the mold, to provide the material, after manually adjusting the elbow position through the conveying system directly to the online type, the corresponding hot elbow machine blanking end structure must be able to meet the requirements of the work.

The production range of elbow machine equipment is;Diameter 21-1620mm, wall thickness 3-120mm.

Elbow machine equipment production material is: carbon steel, alloy steel, stainless steel, etc.

2111-2113.