| Hebei elbow machine manufacturers on the introduction of elbow machine
The elbow machine is composed of four parts: the main machine of the elbow pushing machine, the hydraulic oil pump, the intermediate frequency power supply, and the intermediate frequency coil adjusting frame.
Elbow machine specification range: 21mm-1620mm, radius :1D,1.5D,2D.
The thickness that the elbow machine can produce: 3mm-100mm
The material that the elbow machine can produce is divided into: carbon steel, stainless steel, alloy steel.
The elbow machine adopts the unique voltage stabilization technology, even if the input voltage fluctuates ±10%, it can still keep the intermediate frequency output power stable.Energy saving and environmental protection, elbow push machine in the production process of small noise, small pollution, simple operation, high production efficiency.
The coil bracket of the elbow machine is up and down, front and back, and the swing is adjusted by the motor for safer operation.
The elbow machine adopts hydraulic automatic feeding mechanism, and the gate adopts hydraulic opening and closing. According to the needs of the elbow pushing machine, two or four cylinders are used to push the system, so that the elbow machine is more stable in the process of operation.
Elbow machine itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize various types of elbow machine according to customer requirements.
The elbow machine is divided into two kinds: one is medium frequency heating pushing machine, the other is cold pushing machine. The diameter of the elbow pushed by the cold pushing machine is 21mm-630mm, and the wall thickness is 3mm-30mm. The diameter and wall thickness of the elbow pushed by the medium frequency heating pushing machine are 21mm-1620mm, and the wall thickness is 3mm-100mm or more.Cold push elbow machine mainly low price and low cost.Although the price of intermediate frequency heating elbow machine is not as cheap as that of cold pushing elbow machine, the intermediate frequency heating elbow machine has high production efficiency and simple operation.The middle frequency bending head machine adopts PLC control system.
The cold push elbow machine mainly includes a frame, a working table, a side working table, a hydraulic press, a fuel tank, an electrical box and a control panel, as well as a forming mold.
The intermediate frequency heating elbow machine mainly includes the main machine, the hydraulic pump station, the operation table, the motor control cabinet, the intermediate frequency power supply, the compensation capacitor, the water cable, the intermediate frequency coil adjusting frame, the reactor.
All the mechanical equipment of our company need to be customized in advance. It will take 60 days for our company to make pipe fitting equipment. If you need to customize the pushing machine, you need to book it in advance.
1401
| 