| How to use elbow beveler safely
When using the elbow beveling machine, we must pay attention to safety. Before use, we should check to see whether the power supply of the motor is good, and when using, we should wear gloves and safety guardrail.And to prevent static electricity.Before the groove, it is also necessary to check whether the rotating part is abnormal and whether the lubrication is smooth. It can be cut after the car test is correct first.
In the beveling work, the operator needs to cooperate, and in the beveling at the same time to tighten, the beveling machine in the beveling needs the beveling knife, the amount of knife is gradually increased.Cut off the power immediately after use.
The above is the introduction of the safe use of elbow beveling machine, hoping to help more users.If you need a more detailed understanding of elbow beveling machine, you can directly come to the company for reference and consultation.
The working principle of the hydraulic system of elbow bevel machine is composed of several circuits: tool reversal circuit: tool reversal circuit is composed of the wheel pump: this wheel shunt, electromagnetic relief valve, share speed regulating valve, motor, complete tool reversal, and variable speed.The pressure stabilizing effect of the share speed regulating valve improves the dynamic characteristics of the motor. The one-way valve 13 is used to improve the back pressure of the oil return.Share valve control crawler circuit: the circuit is composed of wheel pump: this wheel shunt, share relief valve, three-position four-way solenoid share directional valve and motor.Share reversing valve and speed sensor to complete the creeping speed conditioning, when necessary can also complete fast forward, back.The share relief valve adjusts the oil inlet pressure value of the motor to complete the selection of different feed force for different materials.Safety circuit: the circuit is mainly composed of hydraulic control check valve, when the tool suddenly stopped rolling, the creeping motor quickly relief pressure.Ensure that the tool and body are not damaged.Radial feed loop, which is composed of wheel pump, wheel shunt, overflow valve, three-position four-way solenoid directional valve and hydraulic motor share speed regulating valve, completes the tool radial low speed feed. When the radial milling valve is out, the radial feed self-lock can be carried out circumferential prostrate feed.
1301-1303.
|
