| Elbow push machine and the advantages of the device process
Elbow Pushing Machine: Elbow Pushing Machine is a special equipment for the production of elbows. It can produce carbon steel and alloy steel elbows with the wall thickness of 21-1620mm and the thickness of 3-120mm and above 1D.
Elbow push machine in the device to first pull out the elbow push machine clamping die fixed mandrel.Place the clamping die of the elbow push-making machine, and then Pierce the fixed mandrel into it.Install elbow push machine, the next step is debugging, elbow push machine clamping die seat fixed relax, elbow push machine will control panel in manual form, press the tube button, to the end of the jia mo way.At this time there need to be a gap between the wheels, you can adjust the screw seat to adjust.Adjust the whole screw of the jia mo seat so that the jia mo and the wheel mold are completely closed.Press the back clamp button to retreat the steamed bun, and then the elbow push machine will adjust the steamed bun screw clockwise to turn about 1/2-1/4 laps.Then lock the fixing nut of the sandwich seat.The above mainly introduces the advantages of the elbow push machine and the device process.
The process flow of elbow making by elbow mechanism
Elbow mechanism elbow making process flow: elbow is suitable for a pipe bend.In the pipeline system used in all pipe fittings, the largest proportion.About 80% usually, for different materials or Bo after the elbow selection of different forming process.Manufacturer commonly used seamless elbow forming process are hot push, from the teeth, extrusion and so on.Hot push elbow forming process is the use of special elbow machine, washing and heating device, so that the blank set on the mold under the push of the elbow machine forward movement, in the movement is heated, expanding and bending forming process.Hot push bend deformation characteristics are based on volume before and after plastic deformation rule of metal materials to determine the diameter of the tube billet, using the tube billet diameter bend diameter, through the core module and control the deformation of the process, is the internal arc compressed metal flow, the compensation to other parts of the thinned by hole diameter, wall thickness uniform Angle is obtained.
The elbow produced by the elbow machine has beautiful appearance, uniform wall thickness and continuous production, which is suitable for mass production.The above pages are the advantages of the elbow machine.Elbow machine mainly push carbon steel elbow and alloy steel elbow material.
Elbow machine in the production of elbow heating is mainly used in the middle frequency heating and the middle frequency induction coil.The elbow machine can produce various types of elbow according to the needs of customers.Welcome new and old customers to visit.
12014-12015.
|
