| Elbow machine workshop requirements and working process of their own tools
The elbow machine workshop and auxiliary facilities requirements: the general requirements of the workshop length of 30-40 meters, a single equipment workshop width of 6-8 meters.The pump station and the intermediate frequency power supply are best installed in the auxiliary span of the workshop.The circulating cooling water of the medium frequency power supply for each elbow machine should be greater than 50m3 and there should be dust-proof measures.
User-provided tools in the working process of elbow machine:
Cooling circulating water system (pool, pump, water distributor, upper and lower water pipes).Medium frequency induction heating coil and elbow die core can be purchased separately according to production needs.Equipment in the workshop is connected with wires and cables, specifications see the equipment manual.Equipment hydraulic oil: anti-wear hydraulic oil, etc.Auxiliary equipment: hydraulic press, pipe end cutting machine, elbow testing equipment.Cover the prepared raw steel pipe outside the elbow mold core, place the intermediate frequency induction coil at the end of the elbow mold core, start the cooling water pump, turn on the intermediate frequency power to heat the raw material steel pipe to a certain temperature, and start the elbow machine to push the system.
The above describes the elbow machine on the workshop and the work process need to prepare tools.
Design of elbow machine
Elbow machine is the main equipment for the production of elbow, with a history of nearly ten years.With the development of deep processing technology in our factory, the product has been improved in all directions.At present, elbow machine manufacturers produce elbow machine is heating technology.Elbow products for the production of raw steel pipe: seamless steel pipe, welded steel pipe and coil steel pipe.The equipment can produce elbow product specifications range: outer diameter wall thickness 5-120,1 inch -60 inch, Angle: 22.5 degrees 45 degrees 90 degrees 135 degrees, etc. Can be customized according to customer requirements.
The elbow machine has realized the hydraulic opening and closing of the push plate gate, the hydraulic clamping of the raw material steel pipe and other operating machinery, and combined with the new patent of the innovation and expansion of the company's two-step push machine, developed the four-cylinder elbow push machine and other products.
The outer diameter and wall thickness of the elbow are produced according to the needs of users. The power of medium frequency heating power supply, thrust stroke of the cylinder and the number of cylinders are configured.The elbow machine is composed of the following components: the main machine of the elbow pushing machine, the hydraulic pump station, the motor control cabinet, the intermediate frequency power supply, the compensation electric fusion device, the cable, the intermediate frequency coil adjusting frame, the reactor.
908-9010.
|
