| Hebei cold push elbow machine is the best equipment to produce stainless steel elbow
Cold push elbow machine is used for the formation of elbow, the main power is hydraulic cylinder, there are two forms, ball type and mandrel type
The main characteristic of the ball type cold push elbow machine is low cost, but low efficiency, need more artificial, but the main characteristic of the mandle-type cold push elbow machine is high cost, but also high efficiency, and save manpower
Cold push elbow machine is suitable for the production of Φ21mm-Φ530mm,1D, 1.5d stainless steel, carbon steel elbow.
Cold push elbow machine itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize equal diameter and reducing elbow according to customer requirements are the use of special hydraulic cold push machine forming process method.
Cold push elbow machine is the use of special elbow forming machine, the tube billet into the mold, up and down the mold after the mold, under the push rod, the tube billet along the inner die and outer die reserved clearance movement to complete the molding process.
The elbow made by the cold extrusion process of internal and external die has beautiful appearance, uniform wall thickness and small size deviation, so the cold extrusion manufacturing process is suitable for the production and manufacturing of thin-walled stainless steel elbow. The precision of the internal and external die used in this process is high, and the deviation of the thickness of the tube billet is also demanding.Cold push elbow machine is suitable for the production of Φ21mm-Φ530mm,1D, 1.5d stainless steel, carbon steel elbow.
Cold push elbow machine itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize according to customer requirements
Cold Pushing Machine is mainly used for forming stainless steel cold pushing machine.Equipped with semi-automatic mechanical shedding device, suitable for cold push production of elbow pipe fittings of the main pipe equipment.In the production process of cold push machine, all PLC programming intelligent control can be realized, and two kinds of operation modes can be realized: point moving and semi-automatic. The working pressure of pipe fitting equipment, pushing speed and travel range can be programmed intelligent control according to the process needs.The intelligent control system prepared by our company can be recognized by every user.
Cold Pushing Machine Production Elbow Diameter Range: 21-730mm Cold Pushing Machine can be designed and manufactured in sections.Elbow radius of curvature: 1-25D, the maximum wall thickness of the elbow 4-12mm.
Our company is the earliest production of cold push machine manufacturers, with the continuous development of cold push machine in the enterprise, our company's engineers to the cold push machine design: one is beautiful design, stable performance, long service life!
904-9015.
| 