| Elbow push machine manufacturers to push machine to make the analysis
This series of pipe fitting equipment is mainly used for carbon steel, stainless steel 1D, 1.5D elbow pushing machine, pushing method has steel ball through the ball pushing system and mandrel molding pushing system, mandrel molding pushing system is equipped with semi-automatic mechanical demoulding device.
The main machine consists of the fuselage (frame), the mould closing cylinder, the side pushing cylinder and the demoulding structure. The control structure consists of the power station, the limit device, the pipeline and the electrical control box and the operation box.
Forming principle: in the tunnel die cavity locked by external force, the tube billet is pushed into the forming cavity with inner core by hydraulic jacking rod from the guide section to bend and form, and is demoulded by stripping device. The whole process can be automatically operated by PLC.
Elbow push machine itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize according to customer requirements
Elbow diameter from 21mm-630mm, wall thickness from 3mm-30mm we can do
Elbow push machine is mainly used for stainless steel elbow forming, if the product you need is carbon steel or alloy steel elbow, it is recommended that you choose medium frequency heating elbow machine
Cangzhou Aoguang Machinery Equipment Co., Ltd. not only produces elbow push machine, but also produces pipe bender, tee machine, pipe expanding machine, press, bevel machine and other mechanical equipment as well as supporting molds.
The use of elbow machine to do compound pipe, elbow machine is to do elbow, some customers want to develop a compound pipe equipment, we thought of elbow machine, but the elbow function can not do compound pipe?
I feel is feasible, only need a little modification, we remove the plug part, only keep elbow machine host and intermediate frequency heating part, of course, bend machine heating coil must use straight ring, similar to the expanding machine coil, due to the multiple tube itself also has a space between the steel tube, so don't need a lot of energy and high temperature can complete multiple tube, so we can properly reduce the size of the pipe bend machine hydraulic cylinder and intermediate frequency power.In addition, we can take the inner core of the composite pipe as the mandrel of the elbow machine, and then push the outer core to gradually complete the composite at the heating place.
It can be seen that it is feasible to use the elbow machine to do the composite pipe.
6012-6014.
| 