Introduction to the technology of making tee pipe fittings by tee mechanism
Three - way machine is the production of three - way machine, three - way refers to the metal three - way, whether carbon steel, alloy steel, stainless steel, and titanium alloy of the company's production of three - way machine can be produced.There are generally three kinds of three-way machine, hot drawing three-way machine, hot pressing three-way machine, cold extrusion three-way machine.
Hot drawing tee machine is characterized by low cost, but the pull out outlet is not high enough, and a section of steel pipe needs to be welded.
The hot press tee machine this process is first in order to produce a tee with a larger wall thickness than CSH80.
Cold extrusion tee machine, is also a commonly used tee production method, now the production scale is 1/2(21mm)-24(630mm), thickness is SCH80, it is characterized by high efficiency, low defect rate, reasonable price, generally a molding.
The manufacturing process of the tee shaping machine is as follows: installation preparation - pipe grooving - hole opening - mechanical tee installation - pipe installation - system pressure test.
The three - way machine produced three - way pipe fittings or three - way pipe fittings, three - way joints, etc.Used primarily to change the direction of a fluid.Used in branch of main pipeline.It can be classified according to the size of pipe diameter.Generally made of carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, PLC and other materials.
Tee forming machine is used for forming tee, tee is divided into reducer tee and equal diameter tee.The main power of three-way molding machine is hydraulic cylinder.Tee molding machine itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize according to customer requirements.We can make the diameter of the tee produced by the tee molding machine from 21mm-630mm and the wall thickness from 3mm-20mm.
The company mainly produces various types of tee machine, pipe bender, elbow machine, beveling machine, press, pipe expanding machine and the above pipe fittings and equipment molds, welcome new and old users to order.
Pipe fittings produced by Tee Machine are mainly used in pipe installation
The three-way pipe fittings made by the three-way mechanism are mainly used in the branch pipe of the pipe joint to connect the same or different diameter pipe installation. The three-way pipe fittings used in the pipeline installation are all three-way pipe fittings made by the three-way mechanism made by the pipe fitting equipment company. The company mainly produces a variety of different models and materials of the three-way machine.
The three-way machine is used for the forming of the three-way, the main power type hydraulic cylinder, the three-way machine itself belongs to non-standard products, so there is no specific specifications and models.We can make the diameter of the three way machine from 21mm to 630mm and the wall thickness from 3mm to 20mm.
The company has many years of manufacturing experience in the production of three-way machine, all the purchase of the company's three-way machine users our public four will be provided to each customer at a reasonable price.
Tee machine advanced technology using tap water to squeeze straight pipe into three, reduce lead filling, repairing lead blank, drilling, lead back and other processes, save costs and production time, in order to ensure the stability of water pressure, we use pressure balance to stabilize the water pressure in the copper pipe squeeze three, so that the copper pipe in the extrusion process to maintain a constant pressure;Both sides of the cylinder to adjust the synchronization performance, we also use the synchronizer to synchronize the two sides of the cylinder, so as to achieve a higher rate of finished products (can process the diameter of more than 7 mm copper pipe, pass rate of more than 98%, molding cycle of about 10 seconds/time).
213-304
| 