Elbow machine is a device commonly used in pipe systems to change the flow direction and Angle of the pipe. It is an important industrial equipment, and its operation needs to follow a series of standards and requirements to ensure its efficient operation. The following is a detailed expansion of the operation standard of the elbow machine:
First, equipment installation and commissioning:
1. The installation of the elbow machine must meet the relevant specifications and standards, and be carried out by advanced technicians.
2. During the installation, pay attention to the horizontal, vertical, and levelness requirements of the device to ensure that the device runs stably.
3. During the commissioning process, you should follow the operation manual provided by the equipment manufacturer to ensure the normal operation of all parts of the equipment.
4. In the debugging process, special attention should be paid to the inspection and adjustment of the power system, hydraulic system, electrical system and other aspects of the equipment to ensure the normal operation of the equipment.
2. Operation specifications and requirements:
1. The operator must be trained to understand the structure, working principle and operating points of the elbow machine, and have the ability and skills to operate the equipment.
2. The operator must wear personal protective equipment and operate in accordance with the relevant stable operation procedures.
3. During operation, pay attention to the operating status of the equipment. If there is any abnormal situation, stop the equipment in time for maintenance. Do not forcibly operate the equipment to avoid equipment failure and personal injury.
4. The operator should regularly check the lubrication of the equipment to ensure that all parts of the equipment are well lubricated.
5. The operator should regularly check and maintain the hydraulic system to ensure the normal operation of the system.
6. The operator shall comply with the processing requirements to ensure that the products processed by the elbow machine meet the relevant standards and requirements.
Third, equipment maintenance and maintenance:
1. Regularly check all parts of the equipment, such as hydraulic cylinder, transmission part, guide parts, etc., to ensure its normal operation.
2. Replace lubricating oil and hydraulic oil regularly, and flush and check the hydraulic system.
3. Clean the outside surface and inside of the equipment regularly to keep the equipment clean and tidy.
4. Check the electrical system of the equipment regularly to ensure the normal operation of the electrical equipment.
5. Regularly repair and replace the wearing parts of the equipment, such as seals, bearings, etc., to ensure the reliability and stability of the equipment.
Iv. Stability measures:
1. During the operation of the device, do not overload operations to avoid affecting the service life of the device.
2. Do not repair or adjust the device during the operation of the device to avoid personal injury or device damage.
3. During the operation of the equipment, keep the working environment clean and tidy to avoid the impact of debris and obstacles on the equipment.
4. During the operation of the equipment, the technical evaluation and evaluation of the equipment should be carried out regularly to ensure the normal operation of the equipment.
The above is part of the operation standard of the elbow machine, which summarizes the requirements of the installation and commissioning of the equipment, operation specifications and requirements, equipment maintenance and maintenance, and stability measures. Compliance with these standards and requirements can ensure the normal operation of the elbow machine, improve production efficiency, and ensure the stability of the staff.
| 