Elbow machine is a kind of metal processing equipment, widely used in pipeline manufacturing, construction, shipbuilding, petrochemical and other industries. It can bend metal pipes with large diameters to meet the needs of different engineering projects. The following is the detailed process sequence of the operation of the elbow machine, including equipment preparation, operating steps and precautions.
1. Equipment preparation:
1. Prepare the elbow machine: Check that all parts of the elbow machine are in good condition to ensure stability and reliability.
2. Prepare the work site: clean the work area, keep it clean, and ensure safe operation.
2. Operation steps:
1. Place the metal pipe to be bent on the workbench and adjust the height of the workbench so that it is in contact with the fixture of the bending machine.
2. Adjust the fixture of the elbow machine to make it in close contact with the metal pipe to ensure that the pipe is fixed and stable.
3. Power on the elbow machine and connect the power cable to the power socket.
4. Press the start button of the elbow machine to make the machine start working.
5. Set the bending Angle and bending radius and adjust them based on project requirements. Under normal circumstances, according to the pipe diameter and wall thickness to determine.
6. Adjust the running speed and pressure of the elbow machine, according to the hardness of the material and the diameter of the pipe to determine. Under normal circumstances, it is necessary to adjust according to the situation of trial production samples.
7. Operate the control panel of the elbow machine to control the operation and stop of the elbow machine to ensure the accuracy and stability of the operation.
8. Use the bending rod of the elbow machine to bend the metal pipe according to the required Angle. Pay attention to maintain a steady strength and speed, avoid excessive or insufficient.
9. Check whether the bending Angle of the pipe quality after bending meets the requirements. If it does not meet the requirements, it needs to be adjusted and corrected.
10. Turn off the power supply of the elbow machine, pull out the power plug, clean the working area, and keep it clean.
1 When operating the elbow, pay attention to personal stability, comply with the relevant operating procedures and stable operating specifications.
2. Before operating the elbow machine, check and maintain the normal running and stability of the device.
3. During the operation, keep your attention focused to avoid distraction and inadvertent operation.
4. The operator of the elbow machine should be familiar with the operating principle and working essentials of the equipment and master the correct operating skills.
5. After the operation is complete, clean and maintain the device in a timely manner to keep the device in good condition.
Summary: The operation process sequence of metal pipe bending with elbow machine includes equipment preparation, operation steps and precautions. Through the correct operation process and precautions, it can ensure the normal operation and accuracy of the elbow machine, and meet the bending requirements of different engineering projects.
For more knowledge about elbow machine, please pay attention to our website: http://www.aocjx.com
| 