Double-head elbow machine is a commonly used in metal processing equipment, can be used to bend metal pipes or plates, widely used in manufacturing and construction and other fields. The operation of the double-head elbow machine requires a certain amount of technology and experience, the following I will detail the operation steps and precautions of the double-head elbow machine.
1. Preparation
1. Check the machine: ensure that the components of the double-head elbow machine are intact and there is no loosening or wear phenomenon.
2. Prepare the material: Prepare the metal pipe or sheet that needs to be bent and ensure that its length and diameter meet the requirements of the machine.
3. Set parameters: according to the need to bend the material and bending Angle, bending machine parameters, such as bending force, bending speed, etc.
2. Operation steps
1. The material is fixed: the metal pipe or plate that needs to be bent is firmly fixed in the double-head elbow machine to ensure that it will not move or slide.
2, adjust the mold: according to the need to bend the Angle and curve shape, select the appropriate mold, and install it in the bending head of the double-head elbow machine.
3. Turn on the machine: turn on the power switch of the double-head elbow machine, and follow the operation instructions of the machine. It is usually necessary to feed the material into the feed port of the machine and control the operation of the machine through the buttons on the control panel or the touch screen.
4. Bend: According to the set parameters, start the machine and start bending operation. During the bending process, attention should be paid to maintaining the smooth advancement of the material, and pay attention to observing whether the bending Angle meets the requirements.
5. Finish bending: When the material passes through the bending head of the double-head elbow machine, stop the operation of the machine and take out the bent material.
Third, precautions
1. Stable operation: When operating double-head elbows, pay attention to wearing safety hats, gloves and other protective tools to ensure their safety. At the same time, it is necessary to operate in strict accordance with the operating procedures to avoid accidents.
2. Material selection: According to the need to bend the material and requirements, select the combination. The hardness and strength of different materials are different, and the parameters and mold selection need to be adjusted according to the actual situation.
3. Set parameters: Before operating the double-head elbow machine, set appropriate parameters according to actual needs, such as bending force, bending speed, etc. Too high or too low a parameter can lead to unsatisfactory bending effect or machine failure.
4. Regular maintenance: Regular maintenance of the double-head elbow machine, clean the surface and internal parts of the machine, check whether the fasteners are loose, and maintain the normal operation of the machine.
In SUMMARY:
The above is the operation steps and precautions of the double head elbow machine, through the correct operation and maintenance, you can effectively use the double head elbow machine for metal processing, to achieve the process requirements. In actual operation, it is necessary to adjust and optimize the specific situation, and constantly improve operational skills and experience to ensure work efficiency and product quality.
For more knowledge about elbow machine, please pay attention to our website: http://www.gg529.com
| 