Elbow machine is a common metal processing equipment, mainly used for bending metal pipes, often used in automotive, machinery, aviation, construction and other industries. Correct operation and maintenance of the expansion elbow can improve its working efficiency and life, and reduce the occurrence of failures. Here are some suggestions for operating and maintaining the write extension elbow machine:
1. Preparation before operation
1. Check whether the power supply of the elbow machine is normal to ensure the voltage stability.
2. Check whether all parts of the machine are tight, especially the fastening screws.
3. Check whether the oil is sufficient, including hydraulic oil and lubricating oil.
4. Check whether the working area is clean to prevent debris from entering the inside of the machine and affecting the operation.
Second, precautions during operation
1. Before operation, you should be familiar with the operation of the machine and understand the operation process.
2. In the operation should pay attention to stability, especially when it comes to the movement and integration of the machine, should ensure that there are no personnel or obstacles around.
3. The operator should wear appropriate personal protective equipment, such as gloves, masks, goggles, etc. 4. During operation, attention should be paid to the temperature of the machine and the temperature of the hydraulic system should be adjusted in time.
5. During operation, ensure that the diameter and thickness of the metal pipe meet the specifications of the machine.
6. During operation, attention should be paid to the selection and installation of cutting tools, especially the sharpness and firmness of cutting tools. Cutting tools should be cleaned and ground regularly.
Three, maintenance
1. Clean the outside and inside of the machine regularly to prevent dust and oil from entering the inside of the machine and affecting the operation.
2. Replace hydraulic oil and lubricating oil regularly to ensure the normal operation and life of the machine.
3. Regularly check all parts of the machine, especially the fastening screws and hydraulic system, to ensure the stability and stability of the machine.
4. Check the circuit and switch of the machine regularly to ensure that the electrical part of the machine works normally.
5. Regularly check the cutting tools and fixtures of the machine to ensure cutting quality and steadiness.
6. When the machine is not used for a long time, the machine should be cleaned, coated with anti-rust agent, and stored in a dry and ventilated place.
The above is the elbow machine operation and maintenance recommendations, the correct operation and maintenance can extend the life of the machine, reduce the occurrence of failures, improve work efficiency and stability.
For more knowledge about elbow machine, please pay attention to our website: http://www.gg529.com
| 