The stable operation of the elbow machine in the production process plays a vital role in improving the quality of the product, reducing the production cost and improving the work efficiency. Therefore, the operator must be familiar with the operation skills and maintenance methods of the elbow machine to ensure the normal operation of the equipment. Below I will introduce how to operate the elbow machine from the following aspects to avoid failure.
First, the preparation of the machine before opening
Before using the elbow machine, the operator needs to check and prepare the equipment in advance to ensure that the equipment is in good condition.
1. First of all, you need to check whether the power supply of the elbow machine is normal, to see whether a new battery needs to be replaced, pay attention to check whether the connector of the wire plug is tight, to ensure that there will be no wire drop.
2. Next, it is necessary to check whether the operating parts of the equipment are in good condition, such as whether each bearing is lubricated, whether the chain is firm, whether the cylinder and valve are normal, etc. Special attention is needed to check whether the pressure of the hydraulic oil meets the standard for the hydraulic system, and if there is a problem, it needs to be replaced or repaired in time.
3. The operator also needs to clean the workbench before the machine is opened to ensure that no impurities fall into the equipment during the operation.
2. Operate the machine correctly
1. Conventional operation steps: First turn on the power supply, place the pipe to be processed on the workbench, adjust the position of the processing mold, insert the pipe into the processing mold, start the switch, and start the processing process of the machine.
2. The operator needs to operate the equipment in accordance with the specified operating process and requirements, and must not punch holes and expand holes on the equipment at will, otherwise it will seriously affect the quality of the processed products and the life of the equipment.
3. The operator needs to carry out reasonable maintenance of the equipment, timely cleaning, maintenance and overhaul to ensure stable export of the equipment and high processing efficiency.
Third, pay attention to the safety of the equipment
1. The operator must undergo advanced training and understand the operating procedures and precautions of the equipment to ensure personal safety and the stable operation of the equipment.
2. When operating the equipment, the operator should pay attention to wearing stable enough work clothes, shoes and safety hats and other stable accessories to prevent the damage to themselves during the operation.
3. The operator needs to keep in mind a principle, do not deal with the problem of equipment privately, and contact the advanced maintenance personnel in time to solve it.
Fourth, equipment maintenance
1. Regularly check the various parts and parts of the equipment, especially after the equipment is used for a long time, it is necessary to check the various parts, bearings, cylinders, gas nails, etc., for friction and wear parts need to be replaced or lubricated to ensure the stable operation of the equipment.
2. In the process of normal use, the equipment needs to be cleaned and maintained frequently to ensure that the equipment can be kept in good condition.
3. For the processed pipes and various parts, it is necessary to classify and place them, and do the necessary archiving work to facilitate quick search in the future.
To sum up, if you want to avoid the failure of the expansion elbow machine, especially the fatal failure, you must have a reasonable and correct operation method and maintenance process to maintain and maintain the equipment. This can extend the service life of the equipment, but also improve production efficiency, reduce costs, and improve product quality.
For more knowledge about elbow machine, please pay attention to our website:http://www.gg529.com
| 