| Elbow machine maintenance and repair introduction
Elbow machine, hydraulic push machine under normal circumstances, should be maintained once a month or so.
The bending machine is checking the fasteners in all parts to make them in tight state. Oil resistant rubber sealing rings are installed in each joint of hydraulic pump station of elbow machine. Such as sealing ring damage, oil leakage, should be replaced in time.
If it is found that the elbow machine forward and backward failure, first check whether the solenoid valve action, such as normal solenoid valve action, check whether the overflow valve or check valve impurities stuck phenomenon, disassemble with gasoline or diesel cleaning, reinstall can be.
Clean the oil tank and filter the hydraulic tank once within 1-2 months after the elbow machine is in use. When cleaning the tank, clean the inlet oil filter of each pump.
Repair and maintenance of elbow machine equipment: check the fasteners in all parts of the elbow machine, so that the elbow machine is in a tight state. The hydraulic pump station of the elbow machine is equipped with rubber sealing ring, such as sealing ring damage, oil leakage, should be replaced in real time. If it is found that the elbow machine progress and retreat failure, first check whether the solenoid valve action such as solenoid valve action is normal. If there is a card to the phenomenon, disassemble with gasoline or diesel clean, reinstall can be. Clean the oil tank and filter the hydraulic oil once within 1-2 months after use. When cleaning the tank, clean the oil inlet filter of each pump. The above is a brief introduction to the repair and maintenance of the elbow machine.
|
