| How does an intermediate frequency pipe bender work
The production method of medium frequency pipe bender in pushing large radius elbow of more than 2.5D is as follows: the steel pipe with the same diameter is heated through the induction ring by using four wheels to clamp the diameter of the pipe. With the rotation of the rocker arm, the pipe with the same diameter is bent without mandril and core head, and the diameter is not expanded.If the elbow below 3D is needed, then use the medium frequency elbow machine we produce. When producing the small diameter elbow, it must be heated by the mandrake and the core and the medium frequency induction ring to make the large diameter elbow.The company's production of medium frequency pipe bender and medium frequency elbow machine advantages are the price is superior, good quality, high production efficiency, simple operation, mold models, long service life.
The hydraulic pipe bender has advantages and disadvantages
The disadvantage of hydraulic pipe bender is that large pipe diameter can not be formed at one time, and the production process is slow.Different size molds should be worn for tubes of different diameters.The advantages of the hydraulic pipe bender is that the hydraulic pipe bender adopts touch screen and numerical control module, the program of the hydraulic pipe bender is simple and easy to set, the bed structure of the hydraulic pipe bender is stable, and it is relatively simple in the process of operation. The hydraulic pipe bender can produce a variety of Angle pipe bender.The service life of the elbow is long.The production efficiency of the hydraulic pipe bender is high. The pipe bender includes a horizontal setting of the workbench. The workbench is also equipped with an elbow limit switch and a limit controller.The limit switch is connected to the controller.Hydraulic pipe bender can also be produced according to customer requirements.
3003-3008.
|
