Pipe fittings machinery in the production of bend pipe fittings mainly use core head or mandrel push bend, will cut a good steel pipe in the mould, pipe equipment of mould points a lot of kinds, a brief introduction of bend machine is how to produce elbow, elbow mold should have two and a half circle, and each one, in the process of driving system is along the mandrel bending in the process of production.With support at the back, the feeding pipe section is inserted into the mandrel, and then the mandrel is fixed.There is a hydraulic rod jacking device in the middle, through the work of the hydraulic cylinder to push slowly forward.The pipe runs along the mandrel of the die until it reaches the end and the pipe section falls off the mandrel, thus forming an elbow.There is no specific type of pipe fitting machinery, and the type of pipe fitting machinery is customized according to customer requirements.Include what kind of pipe fittings the machine produces.
Cold pushing elbow machine elbow diameter from 21mm-630mm, wall thickness of 3mm-30mm these types of cold pushing elbow machine can be done.Cold push elbow machine is suitable for the production of 21mm-630mm, 1D. 1.5d stainless steel, carbon steel elbow.Cold push elbow machine itself belongs to non-standard products.Cold push elbow machine is easy to operate, energy saving and environmental protection.
The following are the specifications, models and technical parameters of several common cold pushing elbow machines (taking mandrel type cold withdrawing elbow machine as an example)
3002-3005.
|
