| The pipe bender must be maintained regularly
The pipe bender needs regular maintenance: the general pipe bender needs to clean the oil tank and filter the hydraulic box once within 1-2 months of use.Check the fasteners of each part of the pipe bender and the state of fastening.This way you won't find forward and backward failure.If this situation is found forward and backward, first of all, we need to check whether the solenoid valve is always normal, and check whether the sequence valve and the relief valve have impurity stuck.The above phenomenon we generally in the beginning of the equipment, easy to happen.If there is stuck phenomenon, disassemble the pipe bender and clean it with gasoline or diesel oil, then reassemble it.The joint of the hydraulic pump station is equipped with a sealing coil. If the sealing coil is damaged, it should be replaced in time.In this way, the bender will not have the above situation in the production process.This illustrates the advantage of regular maintenance of the pipe bender.
Pipe bender is simple to operate, stable performance, many functions, reasonable structure, easy to use, high production efficiency.It is a special non - standard equipment for manufacturing all kinds of bending steel tubes of equal diameter.It can continuously manufacture steel tubes with multi-section and multi-curvature radius.The technical indexes such as the diameter, wall thickness and radius of curvature of the elbow are proposed by the user.Pipe bender mainly produces carbon steel pipe.The pipe bender produces bending pipes with a diameter of 21mm-1620mm and a wall thickness of 3mm-100mm and above. We can produce these models.Pipe bender mainly includes: frame, main cylinder, movable push plate, elbow clamp wheel platform, elbow rocker arm, rocker arm shaft, intermediate frequency transformer bracket, intermediate frequency power supply, electrical control system and so on.The above is the composition of the bender and the operation of the bender.
Attention of pipe bender when bending pipe
When using the pipe bender, we should check around the work site and clean up all the sundries around the pipe bender.Check whether the protection device on the pipe bender is properly installed. If not, the staff will not start the machine for operation.Check the lubrication part of the pipe bender, and add enough oil when there is no oil or oil.When the pipe bender is running, the staff need to check whether it is normal and whether the electrical switch is sensitive and easy to use.Check that everything is OK before proceeding to work.The pipe bender is bending the pipe.No one is allowed to travel within the range.Prevent the bender from injuring people when bending the pipe.The above briefly introduces the pipe bender in the pipe bending needs to pay attention to.
The 2812-2906-2907
|
