| The use and shaping of elbow pushing machine
Push machine is mainly a special equipment for the production of elbow, can produce 21-1620, wall thickness of 3-120, the multiple is more than 1D carbon steel and alloy steel elbow.The main components of the push machine are the main cylinder, the movable support plate, the feeding device, the intermediate frequency coil, the adjusting frame, the mold, the electrical control system, the operation table, the cooling water circulation system, etc.Pushing machine can push the elbow Angle is divided into: 45°, 90°, 135° and so on.We can push the machine according to customer's requirements to push any Angle of the elbow.Push machine in the push out of the elbow in the shaping, elbow shaping need plastic mold, elbow also need groove, in sandblasting typing and customer needs to spray paint and so on.
Pushing machine in the production process needs to install several hydraulic pumps
Pushing machine in the production process need to install 6 sets of hydraulic pumps, there are 2 sets of main push pump, 2 sets of backward push pump, feeding system with a pump, core rod adjustment and gate with a pump, investment in the work of the first start work pump (core rod adjustment and gate with a pump) work pump in the work can not stop.Push machine at work if found abnormal sound or found fault should immediately stop working.Fix the problem after stopping work, and carry on the work after making sure everything is normal.Push machine is divided into cold push machine and hot push machine, the above push machine mainly produces stainless steel carbon steel and so on.If the customer needs to push the elbow and steel pipe of other materials, we can directly customize the push machine according to the customer's needs.
2813-2901.
|
