| The elbow push machine is composed of the production range and the operation process
The elbow push-making machine is divided into four parts: the main machine of the elbow push-making machine, the hydraulic oil pump, the intermediate frequency power supply, and the intermediate frequency coil adjusting frame.
Elbow push machine specification range: 21mm-1620mm, radius :1D, 1.5d,2D.
Elbow push machine can produce thickness: 3mm-100mm
Elbow push machine can produce material divided into: carbon steel, stainless steel, alloy steel.
The elbow push machine adopts the unique voltage stabilization technology, even if the input voltage fluctuates ±10%, it can still keep the intermediate frequency output power stable.Energy saving and environmental protection, elbow push machine in the production process of small noise, small pollution, simple operation, high production efficiency.
The coil bracket of the elbow push machine is up and down, front and back, and the swing is adjusted by the motor for safer operation.
The elbow pushing machine adopts hydraulic automatic feeding mechanism, the gate adopts hydraulic opening and closing, according to the needs of the elbow pushing machine, two or four cylinders are used to push the system, so the elbow pushing machine is more stable in the process of operation.
This paper briefly introduces the technical parameters and composition of elbow pushing machine
Application: seamless steel pipe, straight seam welded steel pipe and spiral welded steel pipe.1, the elbow specification range is: outside diameter: Φ25mm ~ Φ1420mm;Wall thickness: 5mm ~ 120mm;2. Angle: 22.5°, 45°, 90°, 135° and any Angle required by users;3, the radius of curvature of the elbow is: 1D ~ 2.5D4, according to the need to push a variety of curvature radius of the bending steel pipe, also known as the unequal diameter elbow.Unit into two, elbow push system structure: equipment frame rails and the main cylinder and the plate, activities before pushing plate, plate, feeding device, intermediate frequency coil adjustment device (intermediate frequency heating coil, bend mold, mold rod), intermediate frequency power supply heating equipment, electrical control system, hydraulic control system, work station (touch screen), cooling water circulation system, etc.
2601-2605.
|
