| The structure and working principle of the push machine
Pushing machine equipment for double cylinder or four cylinder average speed forward, pump station valve platform adopts integrated form.The pumping station is composed of multiple stages. There are 2-3 working pumps for the equipment of the first to the sixth specifications, and 1 working pump station for the bending test equipment of the seventh and eighth specifications. One book and one historical background is set.
Pushing machine is divided into one push push bending in two and three push push two forms, hydraulic two push bending machine, the total stroke of standard type can be customized according to the requirements of users directly.
Pushing machine material by the feeding machine, driving steel wire rope, push pipe, steel wire rope wheel, to work, the original pipe to be expanded into the equipment.
The intermediate frequency power supply is installed in the front of the equipment, and the intermediate frequency induction coil is secured on the adjustment frame. The expanding tube core head mold is installed, and the power supply is turned on to push the system.
The advantages of the push machine are: powerful power, stepless speed, simple operation, safe and reliable, forming products of higher accuracy.
The main reference of elbow machine: select the main push pump according to the elbow to be pushed according to the selected speed of the elbow to be pushed, the gate core rod is heated to the working temperature to start pushing work, the push speed is adjustable and push to the middle electric elbow machine automatically stop the hydraulic gate gate dead-core rod feeding, loosen the gate back to the end gate gate to the outside diameter of the rod to start pushing.The main push pump can be used at the same time when it works. In general, only one can be used.You can also go backwards instead of stopping.Reverse pump can not be used at the same time, only one can start, the other standby.Feeding pump can only be used when feeding.Main oil pump hydraulic system safety pressure positioning attached to the oil cylinder system safety pressure positioning.Travel switch is installed at both ends of elbow machine travel.The actual stroke should be less than the maximum stroke.That is, the two ends before and after the movable push plate are left with a margin, so as not to run the cylinder piston.
The company mainly produces elbow machine, pipe bender, three-way machine, press, pipe expanding machine, beveling machine and so on all the above supporting molds.The caliber and wall thickness of the above pipe fitting equipment are directly customized according to the needs of customers.
|
