| The composition and operating power of the elbow machine
Working principle of the elbow machine: cover the prepared raw material steel pipe outside the elbow mold core, place the intermediate frequency induction coil at the end of the elbow mold core, start the cooling water pump, turn on the intermediate frequency power to heat the raw material steel pipe to about 750℃, and then start the pushing machine to push.
The elbow machine has four cylinders, the maximum thrust is 1432 tons, and the maximum thrust is 1200 tons.The maximum theoretical forward speed is 620mm/min, and the theoretical backward speed is 1210mm/min.
The elbow machine can produce the 21-1620 elbow with the wall thickness of 3-120mm. The material of the elbow is carbon steel, alloy steel, stainless steel, etc.
Elbow machine hydraulic pump station motor power and working pump station is based on what type of elbow pushed by the customer.
This elbow machine has the advantages of simple operation, high production efficiency and low cost in the process of elbow production.
The main components of the elbow machine are: frame, main cylinder support plate, including the main cylinder, movable push plate, front support plate, semi-automatic feeding mechanism, intermediate frequency coil adjusting frame and intermediate frequency heating coil, intermediate frequency power supply, electrical control system and so on.
The inner diameter and outer diameter of the cylinder and the effective stroke of the elbow machine in the production process are customized according to customer needs.
Composition of pipe fitting equipment and inspection process
Our company produces various types of elbow machine, three-way machine, pipe bending machine, pipe expanding machine, elbow bending dual-use push machine, press, roll machine and other media, and a variety of hydraulic pipe fittings equipment.Various types of pipe fitting equipment can be customized according to the wall thickness and diameter proposed by customers.
The above machine parameters and characteristics: one machine multi-head, can use 3 cores at the same time production, can also use 2 cores and 1 cores.High production efficiency, convenient and flexible.Equipped with speed display and temperature display device, can accurately display the working speed and working heating temperature of the machine.
Machine components of pipe fitting equipment: main engine, hydraulic system, intermediate frequency control system, heating coil, operation control system, etc.Note in the acceptance of the above pipe fitting equipment: after the completion of the production of pipe fitting equipment, the buyer shall send relevant personnel to the manufacturer for acceptance.Acceptance method: check all the performance of the machine, and carry out test production. The production specification, quantity and time shall be determined by the buyer until the buyer is satisfied.The products tested and produced shall be handled by the Seller and the expenses incurred shall be borne by the Seller.After the equipment is delivered, the buyer shall install it by himself.If the seller needs to go to the buyer's place for production and commissioning, the buyer shall pay USD1600 or RMB 10,000, and bear the round-trip expenses.
2013-21015.
|
