| Introduction of multi - head beveling machine
Features of automatic beveling machine:
1: by the bevel out of the workpiece that can be used for welding, do not need to do any processing.The thickness of any cutting material is 6-30mm, the minimum width is 50mm, and the minimum length is 70mm.
2: the hypotenuse Angle in the range of 25 degrees to 45 degrees, free to adjust, do not need to replace parts.
3: a inlet width up to 12mm, the maximum width of the groove up to 18mm.
4: the pressure rod and the workpiece support parts can be adjusted up and down within the range marked with scale.
5: flat groove machine can operate the machine vertically or horizontally, the workpiece that needs to be cut is tightly fixed
6: can be beveled from the left or right side.Flexible and convenient operation.
7: All circuit equipment are installed in the dust-free box, the machine can be safe operation.Aocheng Machinery Equipment Co., Ltd. not only produces single head beveling machine, as well as automatic double head beveling machine, three head beveling machine.The beveling machine itself belongs to non-standard products, there is no specific specification model, can be customized according to customer requirements.
8: Conform to CE standard.
Today received a customer calls in Malaysia, the customer and I said let me help to purchase a flange device, which is directly in the production of flange air hammer, I help customer asked a lot of manufacturers in Malaysia, will wait until the customer came to us to see manufacturers, customers satisfied by the manufacturer factory, direct the companies in the us to customize a complete set of equipment for the production of the flange.There are air hammers, electric furnaces, and moulds for making flanges.Although it is not the equipment produced by our company, I am very happy to get the satisfaction of our old customers.Help old customers to purchase flange equipment, also known as pipe fitting equipment.
1505-15011.
| 