| Elbow machine is the main production of pipe fittings push machine
The elbow machine is mainly composed of the main machine of the elbow pushing machine, the hydraulic pump station, the operation table, the motor control cabinet, the intermediate frequency power supply, the compensation capacitor, the water cable, the intermediate frequency coil adjusting frame, and the reactor.
Medium frequency elbow machine can push large diameter of 1420mm elbow.Constant power output of heating power supply for elbow machine.Using unique voltage stabilization technology, even if the incoming voltage fluctuates by 10%, it can still keep the IF output power stable.Energy saving and environmental protection, low noise, low pollution.Elbow special push machine adopts hydraulic automatic feeding mechanism, the gate adopts hydraulic open and close, coil bracket up and down, before and after, the swing is adjusted by motor, the operation is safer.It adopts two or four cylinders according to the needs of the equipment to push the system, so that the equipment runs more smoothly.These are the advantages of elbow machine.
Medium frequency induction elbow machine is the pipe after heating with professional equipment processing and molding, and then cutting heating to the critical temperature above, after a period of insulation soon into the quenching agent, so that its temperature suddenly reduced, with more than the critical cooling rate of rapid cooling method produced by the process.
Elbow production is divided into cold stamping and hot stamping, usually according to the material properties and equipment capacity to choose cold stamping or hot stamping.
The machine has a reasonable structure.It has the advantages of stable performance, practical efficiency and convenient operation. The rolling bone has good flatness, accurate size and Angle.The air duct after occlusioning has high tightness and is firm and durable. After the equipment is equipped with the intelligent thermostatic control system of medium frequency power supply heating, it can realize the operation and control of multiple devices by one person, energy saving and environmental protection, safe operation and other functions, with simple operation, small footprint, convenient movement and other characteristics
Today I got a call from the customer procurement bend machine, customer the first sentence when I pick up the phone ask me this question, I want to be in the production of stainless steel elbow pipe equipment, you produce, I answer our production of bend machine at that time, you need in the production of stainless steel elbow is our production of cold bend machine.Stainless steel elbow machine is mainly a special equipment for the production of stainless steel pipe fittings.The molding method is to push the straight pipe to the mandrel in the main mold force, and is equipped with an automatic shedding device to remove the elbow from the mandrel. The electrical system is controlled by PLC, and the hydraulic system is equipped with a valve, which is convenient for maintenance, simple operation and high production efficiency.
The above is the problem that I consult the user of elbow machine today, the user listened to very satisfied.It is also the difference between each customer in purchasing intermediate frequency elbow machine or cold push elbow machine.We welcome you to visit our company.I am also looking forward to cooperating with you.
1108-1109.
|
