|
|
|
| Nation standard elbow forming machine |
|
| The equipment should be serviced about once a month, maintenance as following:1 Check each part of fasteners, ensu |
 |
|
|
| |
| If you can envision it,We can supply it. E-mail:15230713671@163.com |
|
|
The elbow machine should be serviced about once a month, maintenance as following:
1.Check each part of fasteners, ensure they are fixed.
2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.
3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.
4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.
5.When cleaning tank, you should clean the inside the oil filter of tank also. |
|
|
|
Main features of nation standard elbow machine:
1.good appearance and steady performance
2.It has individual power construction and electrical system,adops PLC botton centralzed control,which can be conveniently adjuste and opereated both manually and automatically.
Forming principle:tube in the external cavity mode locking of the tunnel was hydraulic roof paragraph from the guide rod into the set up within the core of the forming chamber bending by the removal material ejection device,all adopt by PLC intelligent operation。 |
|
| Related Products |
|
 Elbow Hot Forming Machine  induction heatin...  carbon steel elbow machine Elbow forming pushing machine
|
|
|
|
